Puts out about 1.5 watts into 8 Ohm speakers. I made a few necessary changes to the schematic as this transformer did not have a 5V tap so I had to use a 6X5GT for rectification.
I have not thrown it on the scope to see what it will do but it sounds good. I may try changing our the driver tube for something more interesting in the future. The wood has not been glued together for the pictures so there are some gaps on the corners. Need to install a switch and a fuse as well.
View from the top:
Shot of the schematic I used, I completely forgot the local feedback loop on the top plates, ooops.
Big read wires are the filaments.
Pretty tube glow
Copyright © by Shane's Site All Right Reserved.
